# Describe the implementation of any one statistical process control program

Given your main focus on helping managers implement cost control programs, the CFO asked you to put together a memorandum of likely opportunities to reduce costs through the manufacturing facility itself.

• He asked you to write short summaries of what each of the following specific opportunities to reduce costs is all about:
• Describe 1 of the following a total quality programs: Crosby, six sigma, or Juran.
• Describe the implementation of any one statistical process control program (e.g., Deming).
• Discuss moving toward reduction in non-value-added activities. Include examples.
• Explain the adoption of lean manufacturing techniques
• The CFO remembers, from your initial interview, the point you made about the need for firms to consider the total cost of a decision or proposal, which might be different than traditional procedures might consider (when just the costs and benefits of the immediate change, new equipment, or new process might be considered). He asks you to write a short paragraph about that, including an example.
• Finally, the CFO asked you to show him how to construct a control chart because he thinks he might use it in his own office processes to monitor performance in terms of timeliness of getting his reports done. Because you are not familiar with office processes, you instead show him an example of setting up and monitoring a control chart in a manufacturing process, given the following data:
• Part X specifications for cutting a piece of steel are a nominal dimension of 1″ +/- 0.05″.
• Once the process was deemed to be in control by the engineers, the next 10 consecutive samples drawn from the actual production showed a standard deviation of 0.016.
• Actual sampling of production the next day showed consecutive part actual dimensions of the following: 1.03, 1.03, 1.035, 1.039, and 1.046.
• Using this resource(http://www.databison.com/control-chart-in-excel/) to assist you, set up a statistical process control (SPC) chart by plotting the following:
1. The upper and lower specification limits
2. The part’s nominal dimension
3. The upper and lower control limits
4. The actual dimensions of the 5 samples
• Is there any cause for concern? Explain your reasoning.
 Grading Criteria Percentage Deliverable requirements addressed; understanding of material and writer’s message and intent are clear. 35% Scholarly research supports the writer’s position and is properly acknowledged, and cited direct quotations may not exceed 10% of the word count of the body of the assignment deliverable (excluding title page, abstract, table of contents, tables, exhibits, appendices, and reference pages). Inclusion of plagiarized content will not be tolerated and may result in adverse academic consequences. 20% Critical thinking: Position is well-justified, there is logical flow, and there are examples. 20% Structure: Includes introduction and conclusion, proper paragraph format, and reads as a polished, academic paper or professional presentation, as appropriate for the required assignment deliverable. 10% Mechanical: No spelling, grammatical, or punctuation errors. 10% APA: Deliverable is cited properly according to the APA Publication Manual (6th ed.). 5%

Place a similar order with us or any form of academic custom essays related subject and it will be delivered within its deadline. All assignments are written from scratch based on the instructions which you will provide to ensure it is original and not plagiarized. Kindly use the calculator below to get your order cost; Do not hesitate to contact our support staff if you need any clarifications.